The maintenance methods of automotive wires mainly include the following points:
Regular inspection: It is recommended to conduct a comprehensive inspection at least every six months, including whether the appearance is clean, whether there are scratches, whether the wires are aged, etc. At the same time, check whether the connection between the wires and the vehicle is firm, and whether the plugs and sockets are loose or damaged. In addition, it is necessary to check whether the cables are damaged or aged, and whether they are bitten by mice or damaged by other objects.
Prevent oxidation: During the production process, operators should wear gloves to avoid local conductor oxidation caused by hand touch. At the same time, sweat from the body should be prevented from dripping onto the conductor to cause oxidation, especially in hot summer weather. It is recommended to use high-temperature-resistant, non-precipitated plastic films, such as PE films, to reduce environmental humidity and prevent conductor oxidation.
Prevent moisture: Automotive wires should be stored in a dry environment to isolate humid air. Therefore, the conductor warehouse needs to be sealed and equipped with a dehumidifier and a thermometer. When the ambient humidity is greater than 75%, the dehumidifier must be turned on to reduce the ambient humidity.
Avoid overloading or overloading: Overloading or overloading should be avoided during use to prevent the device from overheating or damage.
Precautions for daily use: Avoid using vehicle wires in humid or high temperature environments to prevent the device from overheating or damage. At the same time, ensure that the connection between the vehicle and the charging pile is firm to avoid accidents.
Through the above maintenance methods, the service life of vehicle wires can be effectively extended to ensure driving safety.